This tool is designed for tacking of cardboard, insulating material, fabric, foils, leather and similar materials on surfaces of wood or wood-like materials.

It comes equipped with a LED light to indicate the status of the power tool, a LED light for an enhanced visibility during operation, a drive shift knob to select between the single and contact firing mode for a more precise or quick firing, and a depth adjustment wheel to set the nail/staple heads firing depth as desired. It also features a belt hook and soft grip handle.

Besides, it comes equipped with a safety contact pin, which needs to be pressed against the workpiece before the trigger switch is squeezed to fire nails/staples under the single firing mode, thus, working as a security mechanism to avoid an accidental starting of the tool.

Voltage: 20V, 2000mAh
Battery Capacity: 2Ah/4Ah/6Ah (Li-ion) (not included)
Average firing speed: 60 nails/staples per min
Max. firing speed: 100 nails/staples per min
Max. magazine capacity: holds up to 100 nails/staples
Max. length of nails: 50mm (18 Gauge Brad Nails)
Max. length of staples: 40mm (18 Gauge narrow crown light duty staples)
Nail length: 20-50mm
Max. nail cross section width: 1.25mm
Max. nail cross section thickness: 1.05mm
Staple length: 19-40mm
Max. staples crown: 6mm
Max. staple cross section width: 1.2mm
Max. staple cross section thickness: 1mm
Run time:
2Ah battery – 420 staples/nails per charge
4Ah battery – 800 staples/nails per charge
6Ah battery – 1200 staples/nails per charge
Dimensions: 292x259x94mm
Weight: 2.8kgs

LED LIGHT
BELT HOOK
SOFT ERGONOMIC HANDLE
DRIVE SHIFT KNOB TO SELECT FIRING MODE
DEPTH ADJUSTMENT WHEEL
LED LIGHT STATUS INDICATOR
- LED red on = Battery is low
- LED red flashing = The nails/staples are jammed
- LED green on = There are no nails in the magazine, the power tool is in dry fire protection
- LED green flashing = Overheat, the power tool is in overheat protection

*Battery not included